Adhesive for organic Brickslips, can be applied on a multitude of substrates. Applicable on all dry, load-bearing, solid and moderately absorbant substrates. Granol'blend AM is also used for finisching the joints between brickslips.

Granol'blend AM will always be used in combination with organic brickslips Granol'blend FV/EV. Always apply in a thin layer. Adhésive color = color of the joint. Multiple colors available, fast and simple application, can be painted, water vapour open, watertight, same colour after application on the colour.

Granol'blend AM is a ready to use adhesive. It might be advised to add a little water to improve workability. For very porous/absorbing substrates, it is advised to prime the substrate with Poroprim. Clean dirty substrates first. When in doubt, contact our the technical department.

Can be used on the inside as well as on the outside. Steps to follow: stick the adhésive, apply the brickslips in the adhesive, finish the joints by sealing them with a firm flatbrush. Substrate should be checked before application.
For the application of organic brickslips you will need the following tools:
-mesure
-level
-pencil
-toothed trowel 5x5 mm
-scissors
-flat brush 10 mm wide.

Clean all tools with water directly after appication.

Granol'blend AM needs to be applied vertically in a layer of 1,5 to 2 mm. Apply no more than 1m² at a time to avoid too fast drying of the adhesive. stick the organic brickslips in the still humid Granol'blend AM. Apply some pressure on the whole of the brickslip to ensure a good embedding in the adhesive. It is absolutely necessary for the brickslip that its whole surface stays in contact with the adhésive. A way of checking this is by pulling the brickslips off and look the coverage of the adhesive. Immediately after the application of the brickslips, pass with a moist brush of +/- 10 mm wide through the joints. First finish the vertical joints afterwards do the horizontal ones. When working on the outside, double check wether the sides of the bricks are properly covered with glue. Protect against rain, wind, humidity and extreme temperatures at least the first 2 days after application.

2,5-3,4 kg/m²

Buckets of 15 kg

Keeps for 18 months in original packaging and protected from frost. Always close the container after use.

For more information and other tips on the safe handling, storage and disposal of chemicals, consult the most recent Safety Data Sheet.